Honeywell Home T775M2006

Description

The T775 electronic stand-alone controllers are the next generation of commercial and agricultural controls capable of remote sensing of temperature and providing switched and/or proportional outputs to various types of loads. Five models have analog (modulating) outputs for actuator and motor control and NEMA-4 weather-proof enclosures are available for wet environments.

Honeywell Home Electronic Stand Alone Temperature Controller, Series: T775 Series, 24 VAC, 120/240 VAC, 10 A, 50/60 Hz, 2 Inputs, 2 Outputs, -40 to 140 deg F, 4-13/32 in Overall Width, 2-15/16 in Overall Depth, Additional Information: 8-5/32 in H Dimensions

Features

• Easy-to-use graphical interface operating the new T775 is easy and the intuitive programming will save you time on every job, each model includes a keypad lockout
• Internal time clock scheduler - the setback and disable output options, controlled by the built-in scheduler or digital input, will help save energy during unoccupied times and give you more control of the equipment without needing to purchase an additional time clock
• Up to two-independent modulating outputs each output can be individually configured for 0 to 10 V, 2 to 10 V, 4 to 20 mA or Series 90
• Modulating high or low limit control to protect your - equipment from freezing or overheating, models offering this feature give you the ability to adjust your control temperature at sensor a to protect equipment at sensor B
• The control adjusts its modulating output to prevent exceeding the user-entered high or low limit for sensor B
• Reset models with simplified set-up - reset programming is easy
• Simply enter the high and low control temperatures and the corresponding high and low outdoor temperatures
• As your outside temperature gets colder, the set point temperature automatically adjusts to save energy
• Configurable minimum off time if needed, setting a minimum off time can protect equipment and reduce the need for a separate time delay device
• Sensor calibration calibrate input sensors up to +/-10 deg F (+/-6 deg C) for temperature and up to +/-10% of range for other sensors (example - pressure, humidity) to compensate for resistance drops in longer sensor wire runs

Specifications

Documentation