Rheem® RKNL-H240DS40EAJA

Description

Rheem® Electric Heat Package Unit, Series: RKNL-H, Model: H240DS40E, 240000 Btu/hr Cooling, 400000 Btu/hr Heating Input BTU, 460 VAC, 56 A, 70.34 kW Cooling Wattage, 1/3 hp Outdoor Fan, 7-1/2 hp Indoor Fan, 1075 rpm Outdoor Fan, 1725 rpm Indoor Fan Rotational Speed, 60 Hz, 3 ph Phase, (2) Scroll Compressor, 8000 cfm, 11.4 IEER, 11.1 EER Rating, 20 ton Tonnage, 14 Burners, 2 Stages, R-410A, HFC Refrigerant, 91 dBA Decibel Rating, Electric Ignition, High Static VFD Belt Drive, Outdoor Coil - 53.3 sq-ft Face Area, 22 Fins/in, Indoor Coil - 26.67 sq-ft Face Area, 13 Fins/in Coil Rating, 1 in Drain Connection, (8) 2 x 25 x 20 in Filter, Steel, Galvanized, Baked Enamel-Coated, 125 deg F Ambient, 153 in L x 88 in W x 59-1/2 in H

Features

• Complete factory charged, wired and run tested
• Scroll compressors with internal line break overload and high-pressure protection
• Convertible air flow
• TXV refrigerant metering device
• High pressure and low pressure/loss of charge protection standard on all models
• Solid core liquid line filter drier
• One-slab, single pass designed evaporator and condenser coils facilitate easy cleaning for maintained high efficiencies
• Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream
• Hinged major access door with heavy-duty gasketing, 1/4 in turn latches and door retainers, slide out Indoor fan assembly for added service convenience
• Powder paint finish meets ASTMB117 steel-coated on each side for maximum protection, G90 galvanized
• Base pan with drawn supply and return opening for superior water management
• Forkable base rails for easy handling and lifting, one-point electrical and gas connections
• Internally sloped slide out condensate pan conforms to ASHRAE 62 standards
• High performance belt drive motor with variable pitch pulleys and quick adjust belt system
• Permanently lubricated evaporator, condenser and gas heat inducer motors
• Condenser motors are internally protected, totally enclosed with shaft down design
• 2 in filter standard with slide-out design, two-stage gas valve and direct spark ignition
• Tubular heat exchanger for long life and induced draft for efficiency and reliability
• Solid-state furnace control with on board diagnostics, 24 V control system with resettable circuit breakers
• Colored and labeled wiring

Specifications

Documentation