Rheem® RKNL-H300CS40EAJA

Rheem® RKNL-H300CS40EAJA H300CS40E Electric Heat Package Unit, 300000 Btu/hr Cooling, 400000 Btu/hr Heating Input BTU

Brand: Rheem®

Item No: RKNL-H300CS40EAJA

Sign In for Availability
loading

Description

Rheem® Electric Heat Package Unit, Series: RKNL-H, Model: H300CS40E, 300000 Btu/hr Cooling, 400000 Btu/hr Heating Input BTU, 208/230 VAC, 149 A, 87.92 kW Cooling Wattage, 1/3 hp Outdoor Fan, 10 hp Indoor Fan, 1075 rpm Outdoor Fan, 1725 rpm Indoor Fan Rotational Speed, 60 Hz, 3 ph Phase, (2) Scroll Compressor, 10000 cfm, 10.1 IEER, 10 EER Rating, 25 ton Tonnage, 14 Burners, 2 Stages, R-410A, HFC Refrigerant, 92 dBA Decibel Rating, Electric Ignition, High Static VFD Belt Drive, Outdoor Coil - 53.3 sq-ft Face Area, 22 Fins/in, Indoor Coil - 26.67 sq-ft Face Area, 15 Fins/in Coil Rating, 1 in Drain Connection, (8) 2 x 25 x 20 in Filter, Steel, Galvanized, Baked Enamel-Coated, 125 deg F Ambient, 153 in L x 88 in W x 59-1/2 in H

Features

  • Complete factory charged, wired and run tested
  • Scroll compressors with internal line break overload and high-pressure protection
  • Convertible air flow
  • TXV refrigerant metering device
  • High pressure and low pressure/loss of charge protection standard on all models
  • Solid core liquid line filter drier
  • One-slab, single pass designed evaporator and condenser coils facilitate easy cleaning for maintained high efficiencies
  • Foil faced insulation encapsulated throughout entire unit minimizes airborne fibers from the air stream
  • Hinged major access door with heavy-duty gasketing, 1/4 in turn latches and door retainers, slide out Indoor fan assembly for added service convenience
  • Powder paint finish meets ASTMB117 steel-coated on each side for maximum protection, G90 galvanized
  • Base pan with drawn supply and return opening for superior water management
  • Forkable base rails for easy handling and lifting, one-point electrical and gas connections
  • Internally sloped slide out condensate pan conforms to ASHRAE 62 standards
  • High performance belt drive motor with variable pitch pulleys and quick adjust belt system
  • Permanently lubricated evaporator, condenser and gas heat inducer motors
  • Condenser motors are internally protected, totally enclosed with shaft down design
  • 2 in filter standard with slide-out design, two-stage gas valve and direct spark ignition
  • Tubular heat exchanger for long life and induced draft for efficiency and reliability
  • Solid-state furnace control with on board diagnostics, 24 V control system with resettable circuit breakers
  • Colored and labeled wiring

Specifications

Amperage Rating

149 A

CFM Rating

10000 cfm

Coil Rating

Outdoor Coil - 53.3 sq-ft Face Area, 22 Fins/in, Indoor Coil - 26.67 sq-ft Face Area, 15 Fins/in

Compressor Type

(2) Scroll

Connection Type

1 in Drain

Decibel Rating

92 dBA

Dimensions

153 in L x 88 in W x 59-1/2 in H

Drive Type

High Static VFD Belt

EER Rating

10

Filter Size

(8) 2 x 25 x 20 in

Finish

Galvanized, Baked Enamel-Coated

Frequency Rating

60 Hz

HP Rating

1/3 hp Outdoor Fan, 10 hp Indoor Fan

IEER Rating

10.1

Ignition Type

Electric

Input BTU Rating

300000 Btu/hr Cooling, 400000 Btu/hr Heating

Material

Steel

Model

H300CS40E

Number of Burners

14

Number of Stages

2

Phase

3 ph

Refrigerant Type

R-410A, HFC

Rotational Speed

1075 rpm Outdoor Fan, 1725 rpm Indoor Fan

Series

RKNL-H

Temperature Rating

125 deg F Ambient

Tonnage

25 ton

Voltage Rating

208/230 VAC

Wattage

87.92 kW Cooling

Documentation

Instruction/Installation Manual

https://assets.unilogcorp.com/267/ITEM/DOC/Rheem_RKNL_H300CS40EKAH_Manual.pdf

Specification Sheet

https://assets.unilogcorp.com/267/ITEM/DOC/Rheem_RKNL_H300CS40EADH_Specification_Sheet.pdf